Heatless Air Dryers SERIES: ADZORB & ADZORB PLUS Capacity : 40 cfm to 10,000 cfm Working Pressure : 4.5 to 70 bar(g) Need of Compressed Heatless Air Dryer Compressed air leaving the compressor contains considerable quantities of water vapour, oil particles. If the untreated air is supplied to distribution lines, then the moisture would condense to liquid water as it gets cooled. The condensed water is a major cause of downtime in compressed air systems as it causes rust, pitting, blockages and freeze ups, which result in component failure and product rejection. The only way to prevent condensation of water in air lines is to lower the dew point of the air in the system. It is less expensive to own and operate an air dryer than to live with the problems. Adzorb Heatless Air dryer Operation Coalescing filters of 5 micron and 0.01 micron remove bulk moisture and liquid oil from the compressed air. This pre-treated air diffuses to the bottom of the adsorber (T1) and passes through the desiccant bed which adsorbs moisture and dries the air. Dry air leaves the adsorber (T1) and passes through 1 micron dust filter. Thus dry, filtered compressed air is available for precise operation. The desiccant can adsorb only certain quantity of moisture and will reach equilibrium after certain time. It can no longer dries the air to the required dew point and hence it should be regenerated to keep the process continuous. To regenerate the first adsorber (T1), partial quantity of dry air coming out of second adsorber (T2) is diverted to first adsorber (T1). This dry air expands to atmospheric pressure and becomes subsaturated. This subsaturated dry air purges out all moisture from the first adsorber (T1) and makes it ready for next adsorption process. All these operations are perfectly performed by valves and controller. We are dealing Elgi, Trident Dryer , GEM Dryer and Summits Hygronics dryer, Atlas Copco, IR, Kaeser,

7-10 Bar, Oil free dry screw air compressor suitable for ISO8573-1 Class Zero requirement The EX oil-free screw compressor series works on a dry compression principle and no lubricating oils are required throughout the entire compression process. The series is ISO8573.1 Class 0 certified and supplies 100% oil-free compressed air. It is designed with a sophisticated processing rotor, gear drive, and a reliable seal combination to provide high-quality compressed air. It has a long lifespan and a wide scope of applications. The unit is CAD integrated, designed, and made; it employs advanced patented VDT dew point control to monitor the temperature and humidity of the compressed air and to enhance compression efficiency.

Pneuzorb – The modular heatless air dryer is constructed using corrosion resistant Aluminium alloy for longer life span and clean operation; specifically developed for Point of use application. Moisture Indicator to ascertain outlet air quality Purge Economizer offers Potential savings Oil Check apparatus for air quality validation Inbuilt with DDS-Dew point Dependent switching. Capacity : 10cfm to 125cfm Working Pressure : 4 bar(g) to 12 bar(g) We are dealing Elgi, Trident Dryer , GEM Dryer and Summits Hygronics dryer, Atlas Copco, IR, Kaeser,

Compressed air leaving the compressor contains considerable quantities of water vapour, oil & particles. If the untreated air is supplied to distribution lines, then the moisture would condense to liquid water as it gets cooled. The condensed water is a major cause of downtime in compressed air systems as it causes rust, pitting, blockages and freeze ups, which result in component failure and product rejection. The only way to prevent condensation of water in air lines is to dry the compressed air thereby lowering the dew point of the air. One of the most economical method to dry the compressed air is by cooling it to the least possible temperature and separate the condensate. Elix Refrigeration air dryer does this job in the most efficient way. Working principle of Refrigeration air dryer When we cool compressed air, water vapour present in the compressed air is condensed to liquid water and can safely be separated. Summits Elix series refrigeration air dryer works based on this principle. Elix heat exchanger is composed of 3 sections namely Pre-cooler (Air to air heat exchanger), Evaporator (Air to refrigerant heat exchanger) & Moisture separator. Wet compressed air (Red color) enters the pre-cooler section where heat transfer takes place between incoming wet compressed air and outgoing dry compressed air. Wet air is pre-cooled by outgoing dry cool air. At the evaporator section air is further cooled to the dew point of 3°C. Water vapour is condensed and separated at moisture separator and drained via drain port. Dry cool air (Green color) is passed back via precooler to pre-cool the incoming wet air. Thus Dry air at normal temperature is available for its use. We are dealing Elgi, Trident Dryer , GEM Dryer and Summits Hygronics dryer, Atlas Copco, IR, Kaeser, Capacity range from 10 CFM to 20000 CFM

High efficiency refrigeration type compressed air dryers specially designed for high ambient temperature of 45 degC. Non-Cyclic Refrigeration System: HOT GAS BY-PASS Value automatically maintains dew point temperature across a wide range of load and ambient conditions without the need for any adjustments. High pressure, high temperature refrigerant vapor is introduced after the expansion value to ensure temperature control Automatic Condensate Drain: Heavily contaminated condensate is discharged positively by Adjustable electronic timer controlled compressed air powered Auto drain valve Ease Of Installation: All dryers are shipped pre-piped and wired, ready to install and operate. Installation is made easy with conveniently located Air and Drain connections. Environmental friendly: FS CURTIS DRYERS are designed to have low energy usage, helping to conserve the Earth’s Resources and minimize pollution. Refrigerants are with zero ozone depletion factor, and thereby making FS CURTIS dryers ‘OZONE FRIENDLY’

40 Bar, Oil-Lubricated, Booster Compressor Compressed air is an energy source that is as important as electricity and hydraulics. Especially for the production of pet bottles, which are being used more and more in daily life, by people all over the world. Besides, the applications such as leak tests of hydraulic and pneumatic devices, specific drive cylinders, presses, and fixture apparatus also need high-pressure air. Unlike other applications requiring only low-pressure air, both low and high-pressure levels of air up to 40 bars ought to be used in the facilities for these applications. Therefore, instead of designing the whole system considering the high-pressure need, increasing the air pressure just at the certain points where high pressure is needed, is the most energy and cost-efficient solution. As a manufacturer having reciprocating booster compressors in its product portfolio which boost the 7-13 bar compressed air taken from rotary screw compressors, up to 40 bars, FS-Curtis provides the most appropriate solutions with its years of experience and quality policy to pet manufacturers and the enterprises which have to use high-pressure air. These compressors can also be modified to serve as boosters for nitrogen.