An industrial air compressor is a machine that increases the pressure of air by reducing its volume. The compressor works by drawing in air, compressing it, and then storing it in a tank or delivering it directly to the system that requires pressurized air. These systems are used in manufacturing, construction, automotive industries, and other sectors where compressed air is essential.

Heatless Air Dryers SERIES: ADZORB & ADZORB PLUS Capacity : 40 cfm to 10,000 cfm Working Pressure : 4.5 to 70 bar(g) Need of Compressed Heatless Air Dryer Compressed air leaving the compressor contains considerable quantities of water vapour, oil particles. If the untreated air is supplied to distribution lines, then the moisture would condense to liquid water as it gets cooled. The condensed water is a major cause of downtime in compressed air systems as it causes rust, pitting, blockages and freeze ups, which result in component failure and product rejection. The only way to prevent condensation of water in air lines is to lower the dew point of the air in the system. It is less expensive to own and operate an air dryer than to live with the problems. Adzorb Heatless Air dryer Operation Coalescing filters of 5 micron and 0.01 micron remove bulk moisture and liquid oil from the compressed air. This pre-treated air diffuses to the bottom of the adsorber (T1) and passes through the desiccant bed which adsorbs moisture and dries the air. Dry air leaves the adsorber (T1) and passes through 1 micron dust filter. Thus dry, filtered compressed air is available for precise operation. The desiccant can adsorb only certain quantity of moisture and will reach equilibrium after certain time. It can no longer dries the air to the required dew point and hence it should be regenerated to keep the process continuous. To regenerate the first adsorber (T1), partial quantity of dry air coming out of second adsorber (T2) is diverted to first adsorber (T1). This dry air expands to atmospheric pressure and becomes subsaturated. This subsaturated dry air purges out all moisture from the first adsorber (T1) and makes it ready for next adsorption process. All these operations are perfectly performed by valves and controller. We are dealing Elgi, Trident Dryer , GEM Dryer and Summits Hygronics dryer, Atlas Copco, IR, Kaeser,

Pneuzorb – The modular heatless air dryer is constructed using corrosion resistant Aluminium alloy for longer life span and clean operation; specifically developed for Point of use application. Moisture Indicator to ascertain outlet air quality Purge Economizer offers Potential savings Oil Check apparatus for air quality validation Inbuilt with DDS-Dew point Dependent switching. Capacity : 10cfm to 125cfm Working Pressure : 4 bar(g) to 12 bar(g) We are dealing Elgi, Trident Dryer , GEM Dryer and Summits Hygronics dryer, Atlas Copco, IR, Kaeser,

Compressed air leaving the compressor contains considerable quantities of water vapour, oil & particles. If the untreated air is supplied to distribution lines, then the moisture would condense to liquid water as it gets cooled. The condensed water is a major cause of downtime in compressed air systems as it causes rust, pitting, blockages and freeze ups, which result in component failure and product rejection. The only way to prevent condensation of water in air lines is to dry the compressed air thereby lowering the dew point of the air. One of the most economical method to dry the compressed air is by cooling it to the least possible temperature and separate the condensate. Elix Refrigeration air dryer does this job in the most efficient way. Working principle of Refrigeration air dryer When we cool compressed air, water vapour present in the compressed air is condensed to liquid water and can safely be separated. Summits Elix series refrigeration air dryer works based on this principle. Elix heat exchanger is composed of 3 sections namely Pre-cooler (Air to air heat exchanger), Evaporator (Air to refrigerant heat exchanger) & Moisture separator. Wet compressed air (Red color) enters the pre-cooler section where heat transfer takes place between incoming wet compressed air and outgoing dry compressed air. Wet air is pre-cooled by outgoing dry cool air. At the evaporator section air is further cooled to the dew point of 3°C. Water vapour is condensed and separated at moisture separator and drained via drain port. Dry cool air (Green color) is passed back via precooler to pre-cool the incoming wet air. Thus Dry air at normal temperature is available for its use. We are dealing Elgi, Trident Dryer , GEM Dryer and Summits Hygronics dryer, Atlas Copco, IR, Kaeser, Capacity range from 10 CFM to 20000 CFM

PPI gives complete piping solution that guarantees operational excellence for compressed air system. We ensure hassle free installation at customer site. Piping is available in PPR .

firstAir German Series of FS Curtis GmbH and offers a wide range of air cooled rotary screw compressors with a nominal motor power from 4 to 250 kW and operating pressure from 5 to 16 bar(g). For this purpose, a new range of airends with high performance has been developed, designed and produced which, together with our high-quality thermostatic valves, intake valves and separators, contribute to the reliability and long lifetime of the product. Thanks to our highly efficient airends in conjunction with IE3 electric motors, the screw compressors achieve a high technological standard and high efficiency. Thanks to the new high efficiency air-ends linked with the IE3 electrical motors which are just as powerful, a high technological standard and a high efficiency are achieved. High environmental and energy saving standards are also respected when developing new products

Piston Air Compressor Repair Service – Fast, Reliable & Affordable Is your piston air compressor not performing at its best? At PPI Engineers, we provide expert Piston Air Compressor Repair Services in Noida and the surrounding NCR region. Our skilled technicians are trained to diagnose and fix all types of issues—quickly, efficiently, and at a competitive cost. We understand that downtime means lost productivity, which is why we offer prompt, on-site repair services to get your system back up and running with minimal disruption. Common Issues We Fix: Low air pressure or inconsistent output Excessive noise or vibrations Overheating or motor failure Oil leakage or air leakage Worn-out parts or broken valves Starting problems or compressor not turning on Our Repair Services Include: Detailed inspection and fault diagnosis Replacement of faulty components (gaskets, valves, pistons, bearings, etc.) Motor rewinding and electrical repairs Pressure testing and system performance checks Genuine spare parts for long-lasting repairs We handle all major piston air compressor brands and models, including FS Curtis, ELGi, Ingersoll Rand, Atlas Copco, Kaeser, and more.

Best Air Compressor dealer in noida

Lubricated Screw Type Air Compressors – High Efficiency, Low Maintenance Looking for a reliable and energy-efficient compressed air solution? At PPI Engineers, we offer a premium range of Lubricated Screw Type Air Compressors, ideal for continuous-duty industrial applications. These compressors are engineered for performance, durability, and reduced operational costs. Lubricated screw compressors use oil to cool, seal, and lubricate the internal rotors, ensuring consistent airflow, minimal wear, and longer service life. They are perfect for manufacturing, packaging, textiles, pharmaceuticals, and many other industries requiring uninterrupted air supply.