Compressed air leaving the compressor contains considerable quantities of water vapour, oil & particles. If the untreated air is supplied to distribution lines, then the moisture would condense to liquid water as it gets cooled. The condensed water is a major cause of downtime in compressed air systems as it causes rust, pitting, blockages and freeze ups, which result in component failure and product rejection. The only way to prevent condensation of water in air lines is to dry the compressed air thereby lowering the dew point of the air. One of the most economical method to dry the compressed air is by cooling it to the least possible temperature and separate the condensate. Elix Refrigeration air dryer does this job in the most efficient way. Working principle of Refrigeration air dryer When we cool compressed air, water vapour present in the compressed air is condensed to liquid water and can safely be separated. Summits Elix series refrigeration air dryer works based on this principle. Elix heat exchanger is composed of 3 sections namely Pre-cooler (Air to air heat exchanger), Evaporator (Air to refrigerant heat exchanger) & Moisture separator. Wet compressed air (Red color) enters the pre-cooler section where heat transfer takes place between incoming wet compressed air and outgoing dry compressed air. Wet air is pre-cooled by outgoing dry cool air. At the evaporator section air is further cooled to the dew point of 3°C. Water vapour is condensed and separated at moisture separator and drained via drain port. Dry cool air (Green color) is passed back via precooler to pre-cool the incoming wet air. Thus Dry air at normal temperature is available for its use. We are dealing Elgi, Trident Dryer , GEM Dryer and Summits Hygronics dryer, Atlas Copco, IR, Kaeser, Capacity range from 10 CFM to 20000 CFM

COMPRESSED AIR FILTRATION 23-1645 CFM FS-Curtis FFA series compressed air filtration further protects your investment with lower pressure drop. Designed utilizing innovative air filtration media and manufacturing techniques, FFA Series compressed air filters and elements from FS-Curtis increase performance and minimize pressure drop. The result is a savings in operating costs while further protecting your downstream process. Compact and efficient, FFA Series filters and mist eliminators are built to FS-Curtis world-class quality standards with comprehensive third-party testing, including ISO and PNEUROP.

Heatless Air Dryers SERIES: ADZORB & ADZORB PLUS Capacity : 40 cfm to 10,000 cfm Working Pressure : 4.5 to 70 bar(g) Need of Compressed Heatless Air Dryer Compressed air leaving the compressor contains considerable quantities of water vapour, oil particles. If the untreated air is supplied to distribution lines, then the moisture would condense to liquid water as it gets cooled. The condensed water is a major cause of downtime in compressed air systems as it causes rust, pitting, blockages and freeze ups, which result in component failure and product rejection. The only way to prevent condensation of water in air lines is to lower the dew point of the air in the system. It is less expensive to own and operate an air dryer than to live with the problems. Adzorb Heatless Air dryer Operation Coalescing filters of 5 micron and 0.01 micron remove bulk moisture and liquid oil from the compressed air. This pre-treated air diffuses to the bottom of the adsorber (T1) and passes through the desiccant bed which adsorbs moisture and dries the air. Dry air leaves the adsorber (T1) and passes through 1 micron dust filter. Thus dry, filtered compressed air is available for precise operation. The desiccant can adsorb only certain quantity of moisture and will reach equilibrium after certain time. It can no longer dries the air to the required dew point and hence it should be regenerated to keep the process continuous. To regenerate the first adsorber (T1), partial quantity of dry air coming out of second adsorber (T2) is diverted to first adsorber (T1). This dry air expands to atmospheric pressure and becomes subsaturated. This subsaturated dry air purges out all moisture from the first adsorber (T1) and makes it ready for next adsorption process. All these operations are perfectly performed by valves and controller. We are dealing Elgi, Trident Dryer , GEM Dryer and Summits Hygronics dryer, Atlas Copco, IR, Kaeser,

Pneuzorb – The modular heatless air dryer is constructed using corrosion resistant Aluminium alloy for longer life span and clean operation; specifically developed for Point of use application. Moisture Indicator to ascertain outlet air quality Purge Economizer offers Potential savings Oil Check apparatus for air quality validation Inbuilt with DDS-Dew point Dependent switching. Capacity : 10cfm to 125cfm Working Pressure : 4 bar(g) to 12 bar(g) We are dealing Elgi, Trident Dryer , GEM Dryer and Summits Hygronics dryer, Atlas Copco, IR, Kaeser,

High efficiency refrigeration type compressed air dryers specially designed for high ambient temperature of 45 degC. Non-Cyclic Refrigeration System: HOT GAS BY-PASS Value automatically maintains dew point temperature across a wide range of load and ambient conditions without the need for any adjustments. High pressure, high temperature refrigerant vapor is introduced after the expansion value to ensure temperature control Automatic Condensate Drain: Heavily contaminated condensate is discharged positively by Adjustable electronic timer controlled compressed air powered Auto drain valve Ease Of Installation: All dryers are shipped pre-piped and wired, ready to install and operate. Installation is made easy with conveniently located Air and Drain connections. Environmental friendly: FS CURTIS DRYERS are designed to have low energy usage, helping to conserve the Earth’s Resources and minimize pollution. Refrigerants are with zero ozone depletion factor, and thereby making FS CURTIS dryers ‘OZONE FRIENDLY’

7-12 Bar, Direct Driven, Fixed & Variable Speed Rotary Screw Compressor Compact in design, robust in power, the smooth, quiet operation of the NX is ideal for a wide variety of applications ranging from auto body shops to light industrial. High-Performance, Legendary Reliability Stable air pressure, steady airflow, and quieter, continuous-duty operation are just a few of the advantages you get with FS-Curtis rotary screw compressors. These smart, compact units also offer better air quality with less oil carryover than reciprocating models. Intuitive controls and diagnostics make them easy to use and service, too. It all adds up to an extremely reliable machine that can run 100% continuous duty, delivering more airflow and better efficiency in a space-saving design — making the Nx Series ideal for automotive, light industrial, and other applications that require reliable performance in demanding conditions. Nx 15-90 kW Features dBA SHIELD NOISE REDUCTION Designed for quiet operation. Integration of centrifugal blower and drive motors make for extremely smooth and quiet operation Extra-thick sound insulation reduces noise Can be installed in applications where a quiet setting is important eCOOL® TECHNOLOGY The ultimate in system protection and reliability. Protects critical components from compressor-generated heat Extends component life and reduces downtime Compartmentalized air flow design and standard aftercooler QUALITY COMPONENTS Built to the highest levels of dependability and reliability. Standard TEFC motor protects compressor from surrounding dirty air, increasing the efficiency and prolonging the life of the motor. Spin-on air/oil separator allows for quick maintenance and results in one-to-three PPM oil carryover. This translates into lower make-up oil costs and higher quality compressed air. SUPERIOR PACKAGE DESIGN Designed for low cost of ownership and easy service. Space-saving design Pulsation-free air 100% continuous duty Extended service intervals More CFM per horsepower Improved air quality Energy efficiency at full load delivers more air for the mone integrated into a smaller footprint Exclusive FS-Curtis airends utilize the latest rotor profile to maximize efficiency Optional DemandSmart Energy Management System Ideal combination of variable speed drive, controller, and drivetrain. The VSD – time proven directly coupled design – offers faster response and greater operational efficiency Variable operation slows airend speed, which lowers energy costs and reduces wear With DemandSmart technology, the VSD enhances quality by stabilizing air pressure at 1 psi increments Built-in DC Choke protects against harmonic disturbances and eliminates the need to source additional corrective devices iCommand Controller is intuitive and easy to use while precisely delivering compressed air usage.